setTimeout(function(){ window.print(); },500)
 

Technical data


High-pass and low-pass filters

Article no: P2440965

Principle

A coil, a capacitor, an ohmic resistance and combinations of these components are investigated for their filter characteristics as a function of frequency. The phase displacement of the filters is determined also as a function of frequency.

Benefits

  • Simple and very clear set-up: only few components required
  • Cost savings: No need for an additional power supply
  • Simplified implementation: all pre-settings already prepared
  • The software controls all devices simultaneously
  • Further experiments in electricity and electronics can be performed with the equipment

Tasks

  • Determination of the ratio of output voltage to input voltage with the
  1. RC/CR network,
  2. RL/LR network,
  3. CL/LC network,
  4. Two CR networks connected in series
  • Determination of the phase displacement with the RC/CR network.
  • Determination of the phase displacement with two CR networks connected in series.

Learning objectives

  • Circuit
  • Resistance
  • Capacitance
  • Inductance
  • Capacitor
  • Coil
  • Phase displacement
  • Filter
  • Kirchhoff's laws
  • Bode diagram

Operating system-independent software included. Computer not provided.

 

Scope of delivery

Plug-in board, for 4 mm plugs 06033-00 1
Resistor 100 Ohm, 1W, G1 39104-63 1
Resistor 1 kOhm, 1W, G1 39104-19 1
Capacitor 4,7microF/ 100V, G2 39113-03 1
Digital storage oscilloscope with USB, 100 MHz / 2CH, 1GS/s EAK-P-1404 1
Connecting cable, 32 A, blue, various lengths 07362-04 2
Connecting cable, 32 A, red, various lengths 07362-01 2
Measuring cable BNC to 4 mm banana plug, length 1 m EAK-MKS-1 2
brigde plug 06027-07 4
PHYWE Digital Function Generator, USB 13654-99 1

PHYWE Systeme GmbH & Co. KG
Robert-Bosch-Breite 10 – 37079 Göttingen – Germany
www.phywe.com