Bridge rectifiers Principle Now that the students have become familiar with the rectifying quality of diodes, this experiment should demonstrate the functioning of the bridge circuit normally used in practice. They should see that the current flows through the load resistor in the same direction in each half period of the alternating current when 4 diodes in a bridge rectifier are used. Since oscilloscopes and alternating voltage generators with an extremely low frequency are generally not used in student experiments, the behaviour of the bridge rectifier in an alternating current circuit is simulated by reversing the polarity of a direct current power source to determine the direction of the current. You should encourage the students to predict the behaviour of the circuit after reversing polarity of the power source. Aside from the correct answer, here are some other predictions they might come up with: - No current will flow after reversing polarity because the diodes only let the current flow in one direction.
- The current will flow in the opposite direction after reversing polarity of the voltage.
Benefits - No additional cable connections between the building blocks needed - clear arragned and quick setup
- Contact saftey due to puzzle blocks system
- Corrosion-free gold plated contacts
- Doubled earning sucess: Electric circuit diagram on top, real components can be seen unterside
Tasks How can both half periods of alternating current be used to create direct current? Investigate on which path and in which direction the current flows through the bridge rectifier with various polarity scenarios for the voltage. Scope of delivery
Straight connector module, SB
|
05601-01
|
2
|
Angled connector module, SB
|
05601-02
|
3
|
Interrupted connector module with sockets, SB
|
05601-04
|
1
|
Junction module, SB
|
05601-10
|
2
|
Straight connector module with socket, SB
|
05601-11
|
1
|
Angled connector module with socket, SB
|
05601-12
|
1
|
On-off switch module, SB
|
05602-01
|
1
|
Socket module for incandescent lamp E10, SB
|
05604-00
|
1
|
Bridge rectifier module, SB
|
05655-00
|
1
|
Earphones with 4mm-plugs
|
06811-01
|
1
|
Connecting cable, 32 A, red, various lengths
|
07360-01
|
1
|
Connecting cable, 32 A, blue, various lengths
|
07360-04
|
1
|
Connecting cable, 32 A, red, various lengths
|
07361-01
|
1
|
Connecting cable, 32 A, blue, various lengths
|
07361-04
|
1
|
Filament lamps 12V/0.1A, E10, 10 pieces
|
07505-03
|
1
|
PHYWE Power supply, 230 V, DC: 0...12 V, 2 A / AC: 6 V, 12 V, 5 A
|
13506-93
|
1
|
PHYWE Analog multimeter, 600V AC/DC, 10A AC/DC, 2 MΩ, overload protection
|
07021-11
|
1
|
|